Pandora Bartop Kit

The Pandora Bartop is our bartop cabinet designed specifically to fit Pandora panels. Its interior is conceived so that the panel fits directly into the designated space, without the need for modifications. The panel is installed simply by embedding it into the cabinet.

Precision CNC cut from 10mm board with a screw assembly system, all holes come pre-drilled from the factory. Designed for 24″ monitors. Check out our selection of compatible monitors.

Pandora panel not included. We sell the compatible panel in our store: Pandora 10 Plus 26800 in 1 Panel. For a panel to be compatible, it must measure between 63 and 65 cm on the longest part of the top acrylic, and the length of the bottom drawer must be less than 61.5 cm.

Technical Specifications

Height	61 cm
Width	63.5 cm
Depth	51 cm
Monitor gap (width × height)	61.5 × 38 cm
Recommended monitor	24″
Board thickness	10 mm
Assembly system	Screws (pre-drilled holes, screws included)
Required U-molding	8 meters of 10 mm
Manufacturing	CNC precision

Special Features

Designed for Pandora panels — The cabinet includes a specific space to house the panel. Installation is immediate: simply embed the panel in place, with no additional tools.

Wooden marquee included — The Pandora Bartop includes a standard wooden marquee board. If you opt for the acrylics for the marquee and screen, the board is replaced by the marquee acrylic and a support slat is also included under the CPO where the screen acrylic is anchored.

Rear door — Secured with screws to access the interior of the cabinet and wire all components.

Customize your Pandora Bartop

From the product configurator, you can adapt the cabinet to your preferences before adding it to the cart. Below we explain each option.

Material

The cabinet is manufactured with your selected material. All materials are 10mm thick.

Raw MDF — MDF board with no surface finish. Included in the base price. Ideal if you plan to paint the cabinet. If you would rather apply vinyl, choose a laminated board: vinyl will stick to MDF, but you need to sand it first with fine sandpaper and clean it very thoroughly.
White Laminated Chipboard — White laminated surface on both sides. No paint or primer needed. Vinyl adheres directly.
Black Laminated Chipboard — Dark finish that contrasts perfectly with vivid vinyl designs. The classic arcade finish.

Speakers

No holes — The cabinet comes without holes in the speaker area.
3″ holes — Holes are drilled without speakers included.
3″ holes with 10W speakers — Includes the pair of 5 W speakers with amplifier, power supply, and wiring.
3″ holes with 20W speakers — Includes the pair of 10 W speakers with amplifier, power supply, and wiring. More powerful sound than the 10W option.

If you select any option with holes, you can also add decorative grills in various colors: Black, Gray, White, Gold, Silver, Chrome, Blue, and Red.

Vinyls

No — The cabinet is delivered without vinyls.
Yes — You will access a selector with multiple designs available.

If you select vinyls, also choose the finish:

Matte — More resistant to fingerprints and scratches.
Gloss — More vivid and saturated colors.

U-Molding

U-molding is the plastic profile applied to the edges of the board. It has an aesthetic function and protects the cabinet edges. The Pandora Bartop requires 8 meters of 10mm U-molding.

No U-molding — If you already have it or prefer to buy it separately.
Black / White / Blue / Red / Green / Yellow / Pink — 8 meters available in various colors.

Accessories

Plug with switch	On/off button integrated into the cabinet.
4-socket power strip	Distributes power to all internal components. Ready to connect to the plug with switch.
Marquee + screen acrylics	The marquee acrylic replaces the standard wooden marquee board included. The screen acrylic and a support slat under the CPO where it is anchored are also added. It allows sticking vinyls on the marquee and screen, enabling you to make the bezel for the monitor. If not purchased, no support for their installation is included.