Ghouls’n Ghosts Fightstick Vinyl

Adhesive Ghouls’n Ghosts vinyl for your Fightstick

Customise the control panel of your Fightstick with the Ghouls’n Ghosts vinyl. Designed specifically for our control panel, this high-quality vinyl brings the legendary world of knights and demons from Ghouls’n Ghosts straight to your gaming corner.

The vinyl is printed with our Fightstick’s outline marked, so you just need to cut it out with scissors following the printed shape and it’s ready to stick onto the panel surface.

This vinyl is made in matte finish only.

How to apply the vinyl

1. Prepare the panel surface

• Raw MDF: sand with fine-grit sandpaper and clean thoroughly, removing all dust. Dust is the vinyl’s main enemy.
• Laminated panel: clean the surface well before applying.

2. Apply the vinyl

1. Prepare water with a few drops of soap in a spray bottle.
2. Spray the panel generously with water.
3. Position the vinyl on the wet panel.
4. Using a squeegee or a card wrapped in a cloth, push the water out towards the edges.
5. Repeat every few hours until the water has fully evaporated.
6. Once dry, trim any small excess with a sharp cutter.