4-player arcade cabinet for a 32″ monitor

This 4-player arcade cabinet combines our 4-player pedestal and an upper section for a 32″ monitor into one upright machine. It stands 168 cm tall and leaves room for four people to play side by side in front of the screen, just like in an arcade.

Split into two parts: upper and lower

The cabinet comes in two parts. The lower part is the pedestal with the control panel, and the upper part holds the screen and the marquee. Each part is assembled separately and then the upper part sits on top of the lower one. If you want the whole thing to be rigid, as if it were a single piece, add the screw fixing between both parts in the configurator.

4-player control panel, pre-assembled

The control panel ships assembled. It lifts open: a piano hinge at the back and two latches at the front let you raise it to install and tidy up the electronics. Players 1 and 2 get a 6-button layout and players 3 and 4 a 4-button layout each.

32″ monitor opening with VESA board

The screen opening is 80 × 47 cm, the same as on our Titán, and is designed for a 32″ monitor. The monitor screws onto a VESA board with 75 and 100 mm holes, which fits most monitors on the market.

Access to the inside

The back closes with lockable doors, and the pedestal also has a front door. You can reach the electronics, power supplies and wiring without taking anything apart.

Construction

Every part is CNC-cut from 16 mm board and the cabinet goes together with cam locks for tight, accurate joints. Choose raw MDF, black laminated chipboard or white laminated chipboard. Monitor and electronics are not included: the cabinet is ready for a Raspberry Pi or a PC.

Configurator options

Before adding it to your cart you can set it up your way:

Material: raw MDF, black or white laminated chipboard, all 16 mm.
Button holes: 28 mm (American standard) or 30 mm (Japanese standard).
Speakers: no holes, 3″ holes, or 3″ holes with 10 W or 20 W speakers included. If you choose holes, you can add coloured grilles.
Marquee and screen acrylics: two clear acrylic panels to stick the marquee vinyl on and make the monitor bezel.
U-molding: the 17 metres of 16 mm edge trim the cabinet needs, in several colours.
Extras: power socket with on/off switch, 4-way power strip, joystick recess and screw fixing between the upper and lower parts.