Star Wars Big Wallcade Vinyls

Customize Your Big Wallcade with Star Wars Vinyls

Transform your Big Wallcade into a unique piece with this set of vinyls inspired by Star Wars.

What’s Included in This Set?

• Vinyls for the marquee and screen acrylics
• Button panel
• Mid front panel
• Lower front panel
• Vinyls for both side panels

Specifications

• Material: High-quality vinyl, resistant to wear.
• Finish: Laminated in gloss or matte (select your preference).
• Compatibility: Exclusive for the Big Wallcade model from OmniRetro.
• Installation: Clean surface and high-adhesion adhesive.

How to Apply the Vinyls

The vinyls are applied using the water and soap technique, which allows repositioning before the adhesive cures permanently. Follow these steps:

1. Prepare the surface. If applying over raw MDF, sand with fine-grit sandpaper and thoroughly clean the resulting dust. If the surface is a laminated board, a thorough cleaning is sufficient. Dust is the main enemy of vinyl.
2. Prepare the mixture. Fill a spray bottle with water and a few drops of dish soap.
3. Apply the vinyl. Spray water generously over the surface and place the vinyl piece on top. The water film will allow you to slide and adjust it to the exact position.
4. Remove the water. With a vinyl squeegee or a credit card wrapped in a soft cloth, push the water from the center toward the edges with firm, even movements.
5. Let it dry. Repeat the water removal operation at intervals of several hours to ensure no moisture is trapped. Let it dry completely before the next step.
6. Trim the excess. With a sharp cutter, trim the excess edges once the vinyl is completely dry and adhered.

Why Choose Our Vinyls?

High-quality vinyls, 100% compatible with OmniRetro arcade furniture. Designed to fit perfectly on each model.

Note: Vinyls are a custom-made product by design. Make sure to select the desired finish (gloss or matte) before completing your order.