Star Wars Ultimate Big Wallcade Vinyls

Customize your Big Wallcade with Star Wars Ultimate vinyls

Transform your Big Wallcade into a unique piece with this vinyl set inspired by Star Wars Ultimate.

What’s included in this set?

• Vinyls for marquee and screen acrylics
• Button panel
• Middle front
• Lower front
• Vinyls for both sides

Specifications

• Material: High-quality vinyl, wear-resistant.
• Finish: Laminated in gloss or matte (select your preference).
• Compatibility: Exclusive for OmniRetro’s Big Wallcade model.
• Installation: Clean surface and high-adhesion adhesive.

How to apply the vinyls

The vinyls are applied using the water and soap technique, which allows repositioning before the adhesive cures permanently. Follow these steps:

1. Prepare the surface. If applying on raw MDF, sand with fine-grit sandpaper and thoroughly clean the resulting dust. If the surface is laminated board, thorough cleaning is sufficient. Dust is the main enemy of vinyl.
2. Prepare the mixture. Fill a spray bottle with water and a few drops of dish soap.
3. Apply the vinyl. Spray water generously on the surface and place the vinyl piece on top. The water film will allow you to slide it and adjust it to the exact position.
4. Remove the water. With a vinyl squeegee or a credit card wrapped in a soft cloth, push the water from the center towards the edges with firm, uniform movements.
5. Let it dry. Repeat the water removal operation at intervals of several hours to ensure no trapped moisture remains. Let it dry completely before the next step.
6. Trim the excess. With a sharp cutter, trim the excess edges once the vinyl is completely dry and adhered.

Why choose our vinyls?

High-quality vinyls, 100% compatible with OmniRetro arcade furniture. Designed to fit perfectly in each model.

Note: Vinyls are a custom design product. Make sure to select the desired finish (gloss or matte) before completing your order.